| Features |
• Fully static design 8-bit Turbo 51 CMOS microcontroller up to 16MHz when VDD=4.5V to 5.5V, 12MHz when VDD=2.7V to 5.5V.
• 8K bytes of Flash EPROM (AP Flash EPROM), with ICP and External Writer programmable mode.
• 256 bytes of on-chip RAM.
• 256 bytes of on-chip AUX-RAM.
• Instruction-set compatible with MSC-51.
— On-chip configurable RC oscillator (6MHz)
• Three 8-bit bi-directional and one 2-bit bi-directional port.
• Two 16-bit timer/counters.
• One Timer with three inputs captures capability.
• 13 interrupts source with four levels of priority.
• One enhanced full duplex serial port with framing error detection and automatic address recognition.
• The 4 outputs mode and TTL/Schmitt trigger selectable Port.
• Programmable Watchdog Timer.
• Four-channel 10-bit PWM (Pulse Width Modulator).
• Eight-channel multiplexed with 10-bits A/D converter.
• One SPI with master/slave capability.
• Eight keypad interrupt inputs.
• Built-in power management.
• LED drive capability (20mA) on all port pins.
• Low Voltage Detect interrupt and reset.
• Code protection.
• Development Tools:
JTAG ICE(In Circuit Emulation) tool
ICP(In Circuit Programming) writer |
