8-bit MCU Series (80C51-based)

Part No.	W79E201A
Datasheet	W79E201.pdf
Description	The W79E201 is a fast, 8051/52-compatible microcontroller with a redesigned processor core that eliminates wasted clock and memory cycles. Typically, the W79E201 executes instructions 1.5 to 3 times faster than that of the traditional 8051/52, depending on the type of instruction, and the overall performance is about 2.5 times better at the same crystal speed. As a result, with the fully-static CMOS design, the W79E201 can accomplish the same throughput with a lower clock speed, reducing power consumption. The W79E201 provides one eight-bit digital/analog input port (Port 1) that includes a ten-bit ADC; three eight-bit, bi-directional and bit-addressable I/O ports; a one-bit port P4.0 for external ISP reboot; three 16-bit timers / counters; and one serial port. These peripherals are supported by an eight-source, two-level interrupt capability. To facilitate programming and verification, the W79E201 contains In-System Programmable (ISP) 16-KB AP Flash EPROM; 4-KB LD Flash EPROM for the loader program in ISP mode; and 256 bytes of RAM. The Flash EPROM allows the program memory to be read and programmed electronically. Once the code is confirmed, it can be protected for security. The W79E201 also supports the in-circuit emulation (ICE) function and a JTAG interface to the development tool for debugging
Features	Fully-static-design 8-bit Turbo 51 CMOS microcontroller up to 16MHz 16KB of in-system-programmable Flash EPROM (AP Flash EPROM) 4 KB of Auxiliary Flash EPROM for the loader program (LD Flash EPROM) 256 bytes of on-chip RAM Instruction-set compatible with MSC-51 On-chip debug function with JTAG interface to development tool Three 8-bit bi-directional ports Three 16-bit timers / counters 8 interrupt sources with two levels of priority One enhanced full-duplex serial port with framing-error detection and automatic address recognition Port 0 internal pull-up resistor optional Programmable Watchdog Timer 6-channel PWM Software-programmable access cycle to external RAM/peripherals 10-bit ADC with eight-channel analog input or digital input port
Diagram	N/A
Package	PLCC44, PQFP44 (Lead-Free RoHS)
Other Files	N/A
Development Tools	N/A
Others	N/A