8-bit MCU Series (80C51-based)

Part No.	W78ERD2A
Datasheet	W78ERD2_W78ERD2A.pdf
Description	The W78ERD2 is an 8-bit microcontroller which is pin- and instruction-set-compatible with the standard 80C52. The W78ERD2 contains a 64-KB Flash EPROM whose contents may be updated in-system by a loader program stored in an auxiliary, 4-KB Flash EPROM. Once the contents are confirmed, it can be protected for security.The W78ERD2 also contains 256 bytes of on-chip RAM; 1 KB of auxiliary RAM; four 8-bit, bi-directional and bit-addressable I/O ports; an additional 4-bit port P4; three 16-bit timer/counters; and a serial port. These peripherals are all supported by nine interrupt sources with 4 levels of priority.
Features	8-bit CMOS microcontroller Pin-compatible with standard 80C52 Instruction-set compatible with 80C52 Four 8-bit I/O ports; Port 0 has internal pull-up resisters enabled by software. One extra 4-bit I/O port with interrupt and chip-select functions Three 16-bit timers Programmable clock out Programmable Counter Array (PCA) with PWM, Capture, Compare and Watchdog functions 9 interrupt sources with 4 levels of priority Full-duplex serial port with framing-error detection and automatic address recognition 64-KB, in-system-programmable, Flash EPROM (AP Flash EPRAOM) 4-KB auxiliary Flash EPROM for loader program (LD Flash EPROM) 256-byte on-chip RAM 1-KB auxiliary RAM, software-selectable Software Reset 12 clocks per machine cycle operation (default). Speed up to 40 MHz. 6 clocks per machine cycle operation set by the writer. Speed up to 20 MHz. 2 DPTR registers Low EMI (inhibit ALE) Built-in power management with idle mode and power down mode Code protection
Diagram	N/A
Package	DIP40, PLCC44, PQFP44 (Lead-Free RoHS)
Other Files	N/A
Development Tools	N/A
Others	N/A