MP4, MP5 Series  (119 k bytes)
Surface Mount Crystals
 |
- MP4 and MP5 surface mount crystals feature metal can low profile crystal mounted on a plastic molded lead frame base.
- Available in EIA-481A-2 24 mm tape and reel. 1000 pcs per reel.
|
SPECIFICATIONS:
| Crystal Holder Prefix: |
MP4 (4.25 mm height)
MP5 (5.25 mm height) |
| Mode of Oscillation: |
3.5 ~ 30.0 MHz AT-cut Fundamental mode
30.1 ~ 70.0 MHz AT-cut 3rd Overtone mode
25.0 ~ 40.0 MHz BT-cut Fundamental mode |
| Calibration Tolerance: |
±30 ppm (±0.003 %) at 25癈 |
| Frequency Stability: |
AT-cut: ±30 ppm (±0.003 %) over –10 to +60癈
BT-cut: ±100 ppm (±0.01 %) over -10 to +60癈 |
| Shunt Capacitance (Co): |
7pF maximum |
| Equivalent Series Resistance (E.S.R.) |
Frequency |
Osc. Mode |
E.S.R. max. |
Frequency |
Osc. Mode |
E.S.R. max. |
| 3.20 ~ 3.56 |
AT funda. |
200 ohms |
9.0 ~ 12.99 |
AT funda. |
60 ohms |
| 3.57 ~ 3.99 |
AT funda. |
180 ohms |
13.0 ~ 15.99 |
AT funda. |
50 ohms |
| 4.0 ~ 4.99 |
AT funda. |
150 ohms |
16.0 ~ 30.00 |
AT funda. |
40 ohms |
| 5.0 ~ 5.99 |
AT funda. |
120 ohms |
27.0 ~ 40.00 |
BT funda. |
40 ohms |
| 6.0 ~ 6.99 |
AT funda. |
100 ohms |
30.0 ~ 70.00 |
AT 3rd O/T |
100 ohms |
| 7.0 ~ 8.99 |
AT funda. |
80 ohms |
|
|
|
| Load Capacitance (CL): |
Series (S) or
Parallel (If parallel, please specify CL value, typical CL ranges from 8 to 32pF) |
| Drive Level: |
0.5 mW maximum |
| Aging: |
Less than ±5 ppm per year. at +25癈. |
| Reflow Soldering: |
10 seconds maximum at +260癈 |
| Storage Temperature: |
-30 to +85癈 |
Note: Tighter tolerance, tighter stability and lower ESR are available.
STANDARD FREQUENCIES AND PART NUMBERS
(partial frequency list only. Frequency tolerance, frequency stability and ESR can be specified per your requirements).
Change MP5 to MP4 if 4.25 mm overall height required.
| MEC Part Number |
MEC Specification Code |
MEC Part Number |
MEC Specification Code |
| MP5-3.579545-18P |
0/50/-10+70/200R |
MP5-16.000312-32P |
0/50/-10+70/50R |
| MP5-3.6864-20P |
0/50/-10+70/200R |
MP5-18.432-S |
0/50/-10+70/50R |
| MP5-4.000-20P |
0/50/-10+70/150R |
MP5-19.6608-S |
0/50/-10+70/50R |
| MP5-4.032-20P |
0/50/-10+70/150R |
MP5-20.000-20P |
0/50/-10+70/50R |
| MP5-4.096-20P |
0/50/-10+70/150R |
MP5-24.000-S |
0/50/-10+70/50R |
| MP5-4.433619-18P |
0/50/-10+70/150R |
MP5-24.576-S |
0/50/-10+70/50R |
| MP5-4.9152-18P |
0/50/-10+70/150R |
MP5-29.4912AF-S |
0/50/-10+70/50R (AT-cut Fund.) |
| MP5-5.0688-18P |
0/50/-10+70/150R |
MP5-30.000A3-S |
0/50/-10+70/140R (AT-cut 3rd O/T) |
| MP5-6.000-18P |
0/50/-10+70/100R |
MP5-30.000A3-S |
0/50/-10+70/140R (AT-cut 3rd O/T) |
| MP5-6.144-18P |
0/50/-10+70/100R |
MP5-32.000A3-S |
0/50/-10+70/140R (AT-cut 3rd O/T) |
| MP5-7.3728-18P |
0/50/-10+70/100R |
MP5-36.000A3-S |
0/50/-10+70/100R (AT-cut 3rd O/T) |
| MP5-8.000-18P |
0/50/-10+70/100R |
MP5-40.000A3-S |
0/50/-10+70/100R (AT-cut 3rd O/T) |
| MP5-9.8304-20P |
0/50/-10+70/100R |
MP5-29.4912BF-S |
0/100/-10+70/50R (BT-cut Funda.) |
| MP5-11.0592-20P |
0/50/-10+70/80R |
MP5-30.000BF-S |
0/100/-10+70/40R (BT-cut Funda.) |
| MP5-12.000-18P |
0/50/-10+70/80R |
MP5-36.000BF-S |
0/100/-10+70/40R (BT-cut Funda.) |
| MP5-14.31818-18P |
0/50/-10+70/50R |
MP5-40.000BF-S |
0/100/-10+70/40R (BT-cut Funda.) |
| MP5-14.7456-S |
0/50/-10+70/50R |
|
|
|
