Product: XO (Clock Oscillator)
Series: HSR
Output: True Sine Wave |
| Selection Guide - Specifications - Product Support |
• True Sine Wave Output
• 10 MHz to 30 MHz
• Output level: 1.0 Vp-p, 10KΩ // 10pF load
• Low phase noise (130 dBc/Hz at 1 KHz offset)
• Low power (< 20 mW)
• 5x3.2x1.2 mm SMD package is also available |
Difference between HS and HSR series:
HS series: 50 Ω load with output ≥ 0 dBm, up to 800 MHz, full size 4 pin DIPs only. HSR series: 10 KΩ // 10 pF load with output 1.0 Vp-p, 10 MHz to 30MHz only.
All popular oscillator packages.
HSR Series Data Sheets: (by package and supply voltages)
| Package Photo |
Prod. Series
(pdf) |
Supply
Voltage |
Freq. min.
(MHz) |
Freq. max.
(MHz) |
No. of pins or pads |
Package Size (mm) / Description / Features |
 |
28HSR53 |
2.8 V |
10 |
30 |
4 |
5x3.2x1.2, 10 KΩ //10 pF load with output 1.0 Vp-p |
| 3HSR53 |
3.3 V |
10 |
30 |
4 |
5x3.2x1.2, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR53 |
5 V |
10 |
30 |
4 |
5x3.2x1.2, 10 KΩ //10 pF with output 1.0 Vp-p |
 |
28HSR57 |
2.8 V |
10 |
30 |
4 |
5x7x1.8 mm SMD, ou10 KΩ //10 pF with tput 1.0 Vp-p |
| 3HSR57 |
3.3 V |
10 |
30 |
4 |
5x7x1.8 mm SMD, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR57 |
5 V |
10 |
30 |
4 |
5x7x1.8 mm SMD, 10 KΩ //10 pF with output 1.0 Vp-p |
 |
28HSR14 |
2.8 V |
10 |
30 |
4 |
Full Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
| 3HSR14 |
3.3 V |
10 |
30 |
4 |
Full Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR14 |
5 V |
10 |
30 |
4 |
Full Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
 |
28HSR24 |
2.8 V |
10 |
30 |
4 |
Full Size 4 pin Gull Wing, 10 KΩ //10 pF with ouput 1.0 Vp-p |
| 3HSR24 |
3.3 V |
10 |
30 |
4 |
Full Size 4 pin Gull Wing, 10 KΩ //10 pF with ouput 1.0 Vp-p |
| 5HSR24 |
5 V |
10 |
30 |
4 |
Full Size 4 pin Gull Wing, o10 KΩ //10 pF with uput 1.0 Vp-p |
 |
28HSR8 |
2.8 V |
10 |
30 |
4 |
Half Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
| 3HSR8 |
3.3 V |
10 |
30 |
4 |
Half Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR8 |
5 V |
10 |
30 |
4 |
Half Size 4 pin DIP, 10 KΩ //10 pF with output 1.0 Vp-p |
 |
28HSR18 |
2.8 V |
10 |
30 |
4 |
Half Size 4 pin Gull Wing, 10 KΩ //10 pF with output 1.0 Vp-p |
| 3HSR18 |
3.3 V |
10 |
30 |
4 |
Half Size 4 pin Gull Wing, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR18 |
5 V |
10 |
30 |
4 |
Half Size 4 pin Gull Wing, 10 KΩ //10 pF with output 1.0 Vp-p |
 |
28HSR42 |
2.8 V |
10 |
30 |
4 |
9.6x11.4x2.5 mm 4 pad SMD, 10 KΩ //10 pF with ouput 1.0 Vp-p |
| 3HSR42 |
3.3 V |
10 |
30 |
4 |
9.6x11.4x2.5 mm 4 pad SMD, 10 KΩ //10 pF with ouput 1.0 Vp-p |
| 5HSR42 |
5 V |
10 |
30 |
4 |
9.6x11.4x2.5 mm 4 pad SMD, 10 KΩ //10 pF with ouput 1.0 Vp-p |
 |
28HSR44 |
2.8 V |
10 |
30 |
4 |
9.6x11.4x4.7 mm 4 pad SMD, 10 KΩ //10 pF with output 1.0 Vp-p |
| 3HSR44 |
3.3 V |
10 |
30 |
4 |
9.6x11.4x4.7 mm 4 pad SMD, 10 KΩ //10 pF with output 1.0 Vp-p |
| 5HSR44 |
5 V |
10 |
30 |
4 |
9.6x11.4x4.7 mm 4 pad SMD, 10 KΩ //10 pF with output 1.0 Vp-p |
General Specifications:
TA=+25°C, VDD= at specified voltage, Load: 10 KΩ // 10 pF
| Mercury Model |
HSR |
Frequency Range
(package dependent) |
10 MHz ~ 30.0 MHz |
| Output Wave Form |
True Sine Wave |
| Input Voltage Range (VDD) |
VDD = +2.7V D.C. min ±5.0 V D. C. max
Voltage codes: ?8?for +2.8 V; ??for +3.3 V; ??for +5.0 V
|
| Frequency Stability (1) |
Commercial (0°C to +70°C)
Temperature Code is "C" |
Stability Code "A": ±25 ppm over 0°C to +70°C
Stability Code "B": ±50 ppm over 0°C to +70°C
Stability Code "C": ±100 ppm over 0°C to +70°C
If non-standard please enter the desired stability after the "C"
(e.g. C20 represents ±20 ppm over 0°C to +70°C) |
Industrial (-40°C to +85°C)
Temperature Code is "I" |
Stability Code "D": ±25 ppm over -40°C to +85°C
Stability Code "E": ±50 ppm over -40°C to +85°C
Stability Code "F": ±100 ppm over -40°C to +85°C
If non-standard please enter the desired stability after the "I"
(e.g. I20 represents ±20 ppm over -40°C to +85°C) |
| Output Level |
1.0 Vp-p typical |
| Harmonic Distortion |
< -25 dBc |
| Output Load |
10 KΩ // 10 pF |
| Current Consumption (typical) |
1.2 mA VDD = +5V
1.1 mA VDD = +3.3V
1 mA VDD = +2.7V |
| Start-up Time |
2 msec typical |
| Phase Noise |
-55°C to +125°C |
| Aging |
±5 ppm per year max. |
| Packaging |
12 mm tape
8 mm pitch, 1000 pcs per reel |
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration. |
