網站首頁 企業簡介 資歷證書 產品展示 下載中心 聯系方式  
代理產品 :  ELAN 義隆 Winbond 淩浩電子 馬居禮
您現在的位置 : 產品展示 >> MEC >> HS      
    產品名稱 : HS 返回上一頁
Product: XO (Clock Oscillator)
Series: HS
Output: True Sine Wave
Selection Guide - Specifications - Product Support
• True Sine Wave Output with Low Harmonic Distribution
• All metal and hermetically-sealed packages

HS Series Data Sheets: (by package and supply voltages)

Package Photo Product Series
(pdf)
Supply
Voltage
Freq. min.(MHz) Freq. max.(MHz) No. of pins or pads Package Size (mm) / Description  / Features
3HS14 3.3 V 10 800 4 Full Size 4 pin DIP, 50 Ω load with output ≥ 0 dBm
5HS14 5 V 10 156 4 Full Size 4 pin DIP, 50 Ω load with output ≥ 0 dBm
3HS24 3.3 V 10 800 4 Full Size 4 pin gull wing, 50 Ω load with output ≥ 0 dBm
5HS24 5 V 10 156 4 Full Size 4 pin gull wing, 50 Ω load with output ≥ 0 dBm
General Specifications:
   TA=+25°C, VDD= at specified voltage, Load: 10 KΩ // 10 pF
3.3 V System 5.0 V System
Input Voltage (VDD) VDD = +3.3 V D.C. ±5%

Voltage Code is "3"
VDD = +5.0 V D.C. ±5%

Voltage Code is "5"
Frequency Range 10 MHz ~ 800 MHz 10 MHz ~ 156 MHz
Frequency Stability(1) Commercial Temperature
(0C to +70C)
code is "C"
Stability Code "A": ±25 ppm over 0°C to +70°C
Stability Code "B": ±50 ppm over 0°C to +70°C
Stability Code "C": ±100 ppm over 0°C to +70°C
If non-standard please enter the desired stability after the "C"
(e.g. C20 represents ±20 ppm over 0°C to +70°C)
Industrial Temperature
(-40C to +85C)
code is "I"
Stability Code "D": ±25 ppm over -40°C to +85°C
Stability Code "E": ±50 ppm over -40°C to +85°C
Stability Code "F": ±100 ppm over -40°C to +85°C
If non-standard please enter the desired stability after the "C"
(e.g. I20 represents ±20 ppm over -40°C to +85°C)
Output Level 0 dBm min. into 50 Ω, output power up to 5 dBm is also available
Harmonics -20 dBc max.
Phase Noise -140 dBc at 10 KHz Offset
Sub-harmonic None
Current Consumption 10 MHz: 9 mA typical
100 MHz: 18 mA typical
150 MHz: 19 mA typical
10 MHz: 18 mA typical
100 MHz: 34 mA typical
150 MHz: 36 mA typical
Option on Pin 1 Output is high impedance when pin 1 is taken low.
Disable time is150 n sec max.
Please add "T" after the stability code for this option.
Storage Temperature -50°C to +100°C
Aging ±5 ppm per year max.
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration.
關於我們 - 收银机 - 友情連接 - 版權聲明 - 法律顧問 -
零售业商用设备税控收款机收银机POS机钱箱电子秤扫描枪蓝牙模块追溯秤 、蓝牙无线扫描枪 财务软件餐饮软件
printer mechanism Cash registerCash drawerpos printerECRScaleArm Pos Link Fiscal Printer
打印机蓝牙打印机条码打印机标签打印机热敏打印机小票打印机收据打印机票据打印机微型打印机机芯 打印机厂
本網站所展示的頂尖科技產品及頂尖科技企業新聞、信息和各種專題資料,均為顶尖科技受權使用,未經協議授權,禁止下載使用.
Copyright @ 1984-2007 www.pinnacle.com.tw All Rights Reserved.