HP

代理產品 :

ELAN 義隆

Winbond

淩浩電子

馬居禮

您現在的位置 :

產品展示

MEC

產品名稱 : HP

返回上一頁

Product: XO (Clock Oscillator)
Series: HP
Output: PECL Logic Square Wave

Selection Guide - Specifications

• HP Series (non-PLL): Ultra low phase noise and low jitter.
• RMS phase jitter (12 KHz ~ 20 MHz): <1 ps.
• -142 dBc/Hz at 100 KHz offset (155.520 MHz)

HP Series Data Sheets: (by package and supply voltages)

Package Photo	Product Series	Supply Voltage	Freq. min.(MHz)	Freq. max.(MHz)	No. of pins or pads	Package Size (mm) / Description / Features
	25HP5761	2.5 V	60	800	6	5x7x2.5, Tri-state on pad 1. Non-PLL based, 6 pad SMD. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP5761	3.3 V	60	800	6	5x7x2.5, Tri-state on pad 1. Non-PLL based, 6 pad SMD. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP5761	5 V	100	200	6	5x7x2.5, Tri-state on pad 1. Non-PLL based, 6 pad SMD. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP5762	2.5 V	60	800	6	5x7x2.5, Tri-state on pad 2. Non-PLL based, 6 pad SMD. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP5762	3.3 V	60	800	6	5x7x2.5, Tri-state on pad 2. Non-PLL based, 6 pad SMD. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP5762	5 V	100	200	6	5x7x2.5, Tri-state on pad 2. Non-PLL based, 6 pad SMD. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP14	2.5 V	60	800	4	Full Size 4 pin DIP, non-PLL based. Non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP14	3.3 V	60	800	4	Full Size 4 pin DIP, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP14	5 V	100	200	4	Full Size 4 pin DIP, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP24	2.5 V	60	800	4	Full Size 4 pin Gull Wing, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP24	3.3 V	60	800	4	Full Size 4 pin Gull Wing, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP24	5 V	100	200	4	Full Size 4 pin Gull Wing, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP8	2.5 V	60	800	4	Half Size 4 pin DIP, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP8	3.3 V	60	800	4	Half Size 4 pin DIP, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP8	5 V	100	200	4	Half Size 4 pin DIP, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP18	2.5 V	60	800	4	Half Size 4 pin Gull Wing,non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP18	3.3 V	60	800	4	Half Size 4 pin Gull Wing, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP18	5 V	100	200	4	Half Size 4 pin Gull Wing SMD, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP62	2.5 V	60	800	6	9.6x11.4x2.5 mm 6 pad SMD, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP62	3.3 V	60	800	6	9.6x11.4x2.5 mm 6 pad SMD, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP62	5 V	100	200	6	9.6x11.4x2.5 mm 6 pad FR4 SMD, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	25HP64	2.5 V	60	800	6	9.6x11.4x4.7 mm 6 pad SMD, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	3HP64	3.3 V	60	800	6	9.6x11.4x4.7 mm 6 pad SMD, non-PLL based. RMS Phase jitter (12 KHz~20 MHz) < 1 ps. -142 dBc/Hz at 100 KHz offset (for 155.520 MHz).
	5HP64	5 V	100	200	6	9.6x11.4x4.7 mm 6 pad FR4 SMD, non-PLL based. Low phase noise: -145 dBc/Hz at 100 KHz offset (for 155.520 MHz).

General Specifications: HP Series
TA=+25°C, VDD= at specified voltage, Load: 10 KΩ // 10 pF

Phase Noise (RMS) typical		155.520 MHz		311.04 MHz		622.080MHz
Mercury Model		HP
Frequency Range (package dependent)		60 MH z ~ 800 MHz. Non-PLL-based.
Output Logic		Differential PECL 100K Square Wave
Frequency Stability (1) Commercial (0°C to +70°C) Temperature Code is "C" Industrial (-40°C to +85°C) Temperature Code is "I"		Stability Code "A": ±25 ppm over 0°C to +70°C Stability Code "B": ±50 ppm over 0°C to +70°C Stability Code "C": ±100 ppm over 0°C to +70°C If non-standard please enter the desired stability after the "C" (e.g. C20 represents ±20 ppm over 0°C to +70°C)
		Stability Code "D": ±25 ppm over -40°C to +85°C Stability Code "E": ±50 ppm over -40°C to +85°C Stability Code "F": ±100 ppm over -40°C to +85°C If non-standard please enter the desired stability after the "I" (e.g. I20 represents ±20 ppm over -40°C to +85°C)
		vs ±10% Supply Voltage Change: ±3 ppm max. vs ±10% Load Change: ±2 ppm max.
Supply Voltage (VDD)		3.3 V ± 10%
Output Voltage HIGH "1" VOH		VDD-1.025 V min.; VDD-0.880 V max. Condition: RL= 50 Ω to VDD-2V
Output Voltage LOW "0" VOL		VDD-1.810 V min.; VDD-1.620 V max. Condition: RL= 50 Ω to VDD-2V
Current Consumption (typical)		75 mA max. for 212.50 MHz. 80 mA max. for 622.080 MHz.
Load		50 Ω into VDD or Thevenin Equivalent. (terminating resistors required on all outputs)
Rise Time (TR) and Fall Time (TF)		0.25 nano sec. typical; 0.5 nano sec. max (20% ↔ 80%)
Duty Cycle		50% ?5% max. measured at VDD -1.3V
Phase Jitter (RMS) (12 KHz to 20 MHz)		1 ps max. ( 12KHz to 20 MHz )
		typical	max.	typical	max.	typical	max.
		2.1 ps	3 ps	2.5 ps	3 ps	4 ps	6 ps
Phase Noise (Peak-to-Peak)		21 ps	30 ps	18 ps	20 ps	25 ps	30 ps
Phase Noise (dBc/Hz) (offset from carrier)	10 Hz Offset	-72 dBc/Hz		-60 dBc/Hz		-55 dBc/Hz
	100 Hz Offset	-100 dBc/Hz		-92 dBc/Hz		-85 dBc/Hz
	1 KHz Offset	-125 dBc/Hz		-122 dBc/Hz		-110 dBc/Hz
	10 KHz Offset	-132 dBc/Hz		-140 dBc/Hz		-130 dBc/Hz
	100 KHz Offset	-142 dBc/Hz		-147 dBc/Hz		-137 dBc/Hz
	1 MHz Offset	-147 dBc/Hz		-146 dBc/Hz		-148 dBc/Hz
	10 MHz Offset	-149 dBc/Hz		-146 dBc/Hz		-150 dBc/Hz

Start-up Time		10 m sec. max.
Aging		±2 ppm per year max.
Tristate Option on Pad No. 1	No Connection	PECL and complimentary PECL outputs.
	Disable	Both outputs are disabled (high impedance) when pad No. 1 is taken below 0.3 Vcc referenced to ground. Oscillator is always ON. Special request: Oscillator is off when disabled. Contact Mercury.
	Enable	At disabled mode, both outputs are enabled when pad No. 1 is taken above 0.7 Vcc referenced to ground.
Input Static Discharge Protection		2 KV max.
Absolute Maximum Rating (permanent damage may be created if operate beyond limits specified.
Supply Voltage VDD		+4.6 V D.C. max.
Input Voltage Vi		Vss-0.5 min.; VDD + 0.5V max.
Input Voltage Vo		Vss-0.5 min.; VDD + 0.5V max.
Storage Temperature TS		-55°C min.; +150°C max.

(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration.

零售业商用设备：税控、收款机、收银机、POS机、钱箱、电子秤、扫描枪、蓝牙模块、追溯秤、蓝牙无线扫描枪、财务软件、餐饮软件
printer mechanism Cash register、Cash drawer、pos printer、ECR 、Scale、Arm Pos Link Fiscal Printer
打印机、蓝牙打印机 、条码打印机 、标签打印机 、热敏打印机、小票打印机、收据打印机、票据打印机、微型打印机机芯、 打印机厂
本網站所展示的頂尖科技產品及頂尖科技企業新聞、信息和各種專題資料,均為顶尖科技受權使用,未經協議授權,禁止下載使用.
Copyright @ 1984-2007 www.pinnacle.com.tw All Rights Reserved.