| Mercury Model |
HM Series (spec. for Group R) |
| Frequency Range |
3.6864 ~160.0 MHz |
| Spread Type |
Total % |
Down Spread(D) |
Center Spread(C) |
Spread Percentage
(Part number suffix)
(tolerance: ±2% of the total % |
0.5% |
-0.5%(D0.5)
Not available if Tri-state chosen |
±0.25% (C0.25)
Not available if Tri-state chosen |
| 1% |
-1% (D1) |
±0.5 (C0.5) |
| 3% |
-3% (D3) |
±1.5 (C1.5) |
EMI Reduction
(Reduction is applied to the
entire frequency spectrum) |
-7 dBc min. 100 MHz at C0.25
-9 dBc min. 100 MHz at C0.5
-15 dBc min. 100 MHz at C1.5
(dBc: with respect to no modulation)
Frequency and total % spread dependent. Call for details. |
Modulation Carrier Frequency
(Dither rate) |
8.3 KHz min.; 55.5 KHz max.;
Frequency dependent. Call for details. |
| Output Logic |
CMOS Square Wave |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5% |
Frequency Stability
(exclude modulation) |
Commercial (0C to +70C):
A: ±25 ppm ; B: ±50 ppm; C:±100 ppm |
Industrial (-40C to +85C):
D: ±25 ppm ; E: ±50 ppm; F:±100 ppm |
| Output Voltage High: 1 |
2.0 V min.; 3.2 V typical (at 90% VDD) |
| Output Voltage Low: 0 |
0.8 V max. ; 0.2 V typical (at 10% VDD) |
| Rise Time / Fall Time |
4 n sec. max. (10% VDD ↔ 90% VDD) |
| Load |
15 pF |
| Start-up Time |
2 ms typical; 5 ms max. |
| Current Consumption |
10.0 MHz: 7 mA; 32.768 MHz: 8 mA
75.0 MHz: 17 mA; 125 MHz: 18 mA |
| Duty Cycle |
50%±5%. ( CL=15 pF ;at 50% VDD) |
| Cycle-to-Cycle Jitter |
±250 ps typical; ±300 ps max. |
| Output Impedance |
40 ohms |
| Static Discharge Voltage |
>2000 V (per MIL-STD-883, method 3015) |
| Storage Temperature |
-65C to +150C |
| Aging |
±5 ppm per year max.; Ta=+25C |
| Packaging |
16 mm tape and reel. 1000 pcs per reel |
| Pin 1 Option |
100 KΩ internal pull-up. Output is high impedance when taken low.
Output enable disable time: 100 ns max. |
| Mercury Model |
HM Series (spec. for group P) |
| Frequency Range |
13.0 ~220.0 MHz |
| Spread Type and % |
Total % |
Down Spread (D) |
Center Spread (C) |
Spread Percentage(1)
(Part number suffix)
Tolerance: ±30% of the total % |
0.5% |
-0.5% (D0.5) |
±0.25% (C0.25) |
| 0.75% |
-0.75% (D0.75) |
±0.375% (C0.375) |
| 1.25% |
-1.25% (D1.25) |
±0.625 (C0.625) |
| 2% |
-2% (D2) |
±1.0 (C1.0) |
| 2.5% |
-2.5% (D2.5) |
±1.25 (C1.25) |
| 3% |
-3% (D3) |
±1.5 (C1.5) |
| 3.5% |
-3.5% (D3.5) |
±1.75 (C1.75) |
| 3.75% |
-3.75% (D3.75) |
±1.875 (C1.875) |
EMI Reduction
(Reduction is applied to the
entire frequency spectrum) |
EMI reduction (dB) = 10Log("Total %"x"SSC Frequency(MHz)"/0.12). |
Modulation Carrier Frequency
(Dither rate) |
25.3 KHz min.; 58.6 KHz max.
Frequency dependent. Call for details. |
| Output Logic |
CMOS Square Wave |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5% |
Frequency Stability
(exclude modulation) |
Commercial (0°C to +70°C):
A: ±25 ppm ; B: ±50 ppm; C:±100 ppm |
Industrial (-40°C to +85°C):
D: ±25 ppm ; E: ±50 ppm; F:±100 ppm |
| Output Voltage High: 1 |
2.4 V min.;(at 80% VDD) |
| Output Voltage Low: 0 |
0.4 V max. (at 20% VDD) |
| Rise Time / Fall Time |
1.2 n sec. max. (20% VDD ↔ 80% VDD) |
| Load |
15 pF |
| Start-up Time |
2 ms typical; 5 ms max. |
| Current Consumption |
25 mA typical; Frequency dependent |
| Duty Cycle |
50%±5%. ( CL=15 pF ;at 50% VDD) |
| Cycle-to-Cycle Jitter |
±100 ps typical;±150 ps max. |
| Output Impedance |
40 ohms typical |
| Static Discharge Voltage |
>2000 V (per MIL-STD-883, method 3015) |
| Storage Temperature |
-65°C to +150°C |
| Aging |
±5 ppm per year max.; TA=+25°C |
| Packaging |
16 mm tape and reel. 1000 pcs per reel |
| Option on Pad 1 |
No Option available. Do not connect. |
