Product: XO (Clock Oscillator)
Series: H, SWO Series
Oscillator Type: Clock Oscillators |
| Selection Guide - Specifications - Product Support |
• CPU, graphics, multimedia A/V clocks
• MPEG / DVD / HDTV clocks
• Laser engine pixel / set-top clocks
• Spread spectrum low EMI clocks
• OC-3, OC-12, OC-48 and OC-192 clocks
• Fast Ethernet and Gigabit Ethernet clocks
• NTSC / PAL encoder/decoder clocks
• PLL / synthesizer clocks
• Fibre channel and ADSL clocks
• SONET / SDH / ATM clocks |
H, SWO Series Data Sheets: (by package and supply voltages)
| Package Photo |
Product Series
(pdf) |
Freq. min.
(KHz) |
Freq. max.
(MHz) |
No. of pins or pads |
Package Size (mm) [inches] / Seat Height |
| Thru-Hole Types |
 |
H14 |
20 |
160 |
4 |
12.8mm x 20.2mm x 5.88mm
0.504in. x 0.795in. x 0.231in. |
 |
H8 |
20 |
160 |
4 |
12.8 x 12.8 x 5.88
0.504in. x 0.504in. x 0.231in. |
| Surface Mount Types - Gull Wing |
 |
H24 |
20 |
160 |
4 |
12.8mm x 20.2 x 7.60mm
0.504in. x 0.795in. x 0.300in. |
 |
H18 |
20 |
160 |
4 |
12.8mm x 12.8mm x 7.60mm
0.504in. x 0.504in. x 0.300in. |
| Surface Mount Types - Leadless |
 |
H42 |
20 |
160 |
4 |
9.6mm x 11.4mm x 2.5mm
0.378in. x 0.449in. x 0.098in. |
 |
H44 |
20 |
160 |
4 |
9.6mm x 11.4mm x 4.7mm
0.378in. x 0.449in. x 0.185in. |
 |
H575 |
20 |
160 |
6 |
5.0mm x 7.5mm x 2.8mm
0.197in. x 0.295in. x 0.110in. |
 |
H53 |
2.5 MHz |
66 MHz |
4 |
5.0mm x 3.2mm x 1.2mm
|
 |
H32 |
16 MHz |
44 MHz |
4 |
3.2mm x 2.5mm x 1.1mm
|
 |
SWO |
20 |
160 |
4 |
5mm x 7mm x 1.4mm
0.197in. x 0.276in. x 0.055in. |
H-Series Specifications:
TA=+25°C, VDD= at specified voltage, Load: 10 KΩ // 10 pF
|
3.3 V System |
5.0 V System |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5%
Voltage Code is "3" |
VDD = +5.0 V D.C. ±5%
Voltage Code is "5" |
| Frequency Range |
20 KHz ~ 125 MHz |
20 MHz ~ 160 MHz |
| Output Logic |
TTL/HCMOS |
TTL/HCMOS |
Output Voltage
HIGH "1" |
TTL |
2.4 V min. |
2.4 V min. |
| HCMOS |
2.97 V min. |
Vcc - 0.5 V min. |
Output Voltage
LOW "1" |
TTL |
0.4 V max. |
0.4 V max. |
| HCMOS |
0.33 V max. |
0.5 V max. |
| Operating Temperature Range |
Commercial (Temperature code is " C "): 0°C to +70°C
Industrial (Temperature code is " I "): -40°C to +85°C |
| Frequency Stability(1) |
Commercial Temperature
(0°C to +70°C)
code is "C" |
Stability Code "A": ±25 ppm over 0°C to +70°C
Stability Code "B": ±50 ppm over 0°C to +70°C
Stability Code "C": ±100 ppm over 0°C to +70°C
If non-standard please enter the desired stability after the "C"
(e.g. C20 represents ±20 ppm over 0°C to +70°C) |
Industrial Temperature
(-40°C to +85°C)
code is "I" |
Stability Code "D": ±25 ppm over -40°C to +85°C
Stability Code "E": ±50 ppm over -40°C to +85°C
Stability Code "F": ±100 ppm over -40°C to +85°C
If non-standard please enter the desired stability after the "C"
(e.g. I20 represents ±20 ppm over -40°C to +85°C) |
| Output Load |
TTL |
2 ~ 10 TTL gates |
| HCMOS |
15 or 50 pF |
Rise Time(Tr)
Fall Time(Tf) |
TTL |
10 n Sec. max; 3 n Sec. typical. Measured between 0.4V to 2.4V
(RL=390 Ω CL=15 pF) |
| HCMOS |
10 n Sec. max; 3 n Sec. typical. Measured between 10% to 90%VDD
(CL=15 pF) |
| Duty Cycle |
TTL |
40% min. 60 % max. (measured at +1.4 V) |
| HCMOS |
40% min. 60 % max. (measured at 50% VDD) |
| Start-up Time |
10 m Sec. max. 5 m sec. typical. |
| Current Consumption |
15 ~ 45 mA (frequency dependent) |
| Option on Pin 1 |
Output is high impedance when "0" is applied to pin 1.
Disable time is 150 n sec max.
Please add "T" after the stability code for this option. |
| Storage Temperature |
-50°C to +100°C |
| Aging |
±5 ppm per year max. |
SWO-Series Specifications:
TA=+25°C, VDD= at specified voltage, Load: 10 KΩ // 10 pF
|
3.3 V System |
5.0 V System |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5%
Voltage Code is "3" |
VDD = +5.0 V D.C. ±5%
Voltage Code is "5" |
| Frequency Range |
1.0 ~ 125.0 MHz |
1 MHz ~ 125.0 MHz |
| Output Logic |
TTL/HCMOS |
TTL/HCMOS |
| Output Voltage HIGH "1" |
2.97 V min. |
4.5 V min. |
| Output Voltage LOW "1" |
0.33 V max. |
0.5 V max. |
| Operating Temperature Range |
Commercial (Temperature code is " C "): 0°C to +70°C
Industrial (Temperature code is " I "): -40°C to +85°C |
| Frequency Stability(1) |
Commercial Temperature
(0°C to +70°C)
code is "C" |
Stability Code "A": ±25 ppm over 0°C to +70°C
Stability Code "B": ±50 ppm over 0°C to +70°C
Stability Code "C": ±100 ppm over 0°C to +70°C
If non-standard please enter the desired stability after the "C"
(e.g. C20 represents ±20 ppm over 0°C to +70°C) |
Industrial Temperature
(-40°C to +85°C)
code is "I" |
Stability Code "D": ±25 ppm over -40°C to +85°C
Stability Code "E": ±50 ppm over -40°C to +85°C
Stability Code "F": ±100 ppm over -40°C to +85°C
If non-standard please enter the desired stability after the "C"
(e.g. I20 represents ±20 ppm over -40°C to +85°C) |
| Output Load |
TTL |
10 LS TTL gates max. |
10 LS TTL gates max. |
| HCMOS |
15 pF |
15 pF |
Rise Time(Tr)/ Fall Time(Tf)
(0.1VDD ↔ 0.9VDD) |
7 n sec. max. |
10 n sec. max. |
| Current Consumption |
1.8 ~ 32 MHz: 15 mA max.
32+~50 MHz: 16.5 mA max.
50+~100 MHz: 35 mA max. |
1.9 ~ 32 MHz: 25 mA max.
32+~50 MHz: 35 mA max.
50+~100 MHz: 40 mA max. |
| Duty Cycle |
50%±10%. (50±5% is also available) |
| Start-up Time |
1.0 ~ 32 MHz: 5 m sec. max.
32+ ~ 125 MHz: 10 m sec. max. |
| Option on Pad 1 |
Note: Pad No. 1 is Tri-State by default for all SWO series. That is:
The output (pad No. 3) is active if no connection or voltage of 2.2V
The output (pad No. 3) is high impedance when voltage of 0.8V or
Disable time is 150 n sec. max.; Enable time is 10 m sec. max. |
| Storage Temperature |
-50°C to +100°C |
| Aging |
±5 ppm per year max. |
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration. |
