| Output Wave Form: Square Wave |
| Package Code |
Frequency Range |
Assembly Technique |
Package Description |
| Thru-Hole Types |
| GL14 |
500 kHz ~ 160 MHz |
4 pin DIL full size |
12.8 x 20.2 x 5.88H
[0.504 x 0.795 x 0.231] |
| GL8 |
4 pin DIL half size |
12.8 x 12.8 x 5.88H
[0.504 x 0.504 x 0.231] |
| GL39 |
4 pin DIL (low profile) |
11.7x 18.3 x 4.7H
[0.461 x 0.720 x 0.185] |
| Gull Wing Surface Mount Types |
| GL24 |
500 kHz ~ 160 MHz |
Gull wing version of G14 |
12.8 x 20.2 x 7.6H
[0.504 x 0.795 x 0.300] |
| GL18 |
Gull wing version of G8 |
12.8 x 12.8 x 7.6H
[0.504 x 0.504 x 0.300] |
| GL47 |
Gull wing version of G39 |
11.7x 21.3 x 4.7H
[0.461 x 0.839 x 0.185] |
| Leadless Surface Mount Types |
| GL61 |
500 kHz ~ 160 MHz |
6 pad FR4 Leadless |
9.6 x 11.4 x 1.85H
[0.378 x 0.449 x 0.073] |
| GL41 |
4 pad FR4 Leadless |
9.6 x 11.4 x 1.85H
[0.378 x 0.449 x 0.073] |
| GL62 |
6 pad FR4 Leadless |
9.6 x 11.4 x 2.5H
[0.378 x 0.449 x 0.098] |
| GL42 |
4 pad FR4 Leadless |
9.6 x 11.4 x 2.5H
[0.378 x 0.449 x 0.098] |
| GL64 |
6 pad FR4 Leadless |
9.6 x 11.4 x 4.7H
[0.378 x 0.449 x 0.185] |
| GL44 |
4 pad FR4 Leadless |
9.6 x 11.4 x 4.7H
[0.378 x 0.449 x 0.185] |
| GL575 |
500 kHz ~ 160 MHz |
6 pad Leadless |
5.0 x 7.5 x 2.65H
[0.197 x 0.295 x 0.104] |
|
3.3 V System |
5.0 V System |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5%
Control Voltage Center (Vc)= +1.65 V
Voltage code is "3" |
VDD =+5.0 V D.C.±5%
Control Voltage Center (Vc) = +2.5 V
Voltage code is "5" |
| Initial Frequency Accuracy (at+25°C) |
To tune to the nominal frequency with
Vc = 1.65 V±0.2V |
To tune to the nominal frequency with
Vc = 2.5V V±0.2V |
| Frequency Range |
10 MHz ~ 156 MHz |
10 MHz ~ 156 MHz |
Output Voltage
HIGH "1" |
2.4 V min. |
Vcc - 0.4 min. |
Output Voltage
LOW "0" |
0.4 V max. |
0.4 V max. |
| Frequency Pulling Range |
From ±30 ppm to ±150 ppm
Control Voltage Range: 0.3 V to 3.0 V
Monotonic |
From ±80 ppm to ±200 ppm
Control Voltage Range: 0.5 V to 4.5 V Monotonic |
Frequency Stability(1)
Commercial temp. range (code "C") |
"A": ±25 ppm over 0°C to +70°C
"B":±50 ppm over 0°C to +70°C
"C":±100 ppm over 0°C to +70°C
For non-standard please give desired frequency stability after the "C".
For example "C20" is ±20 ppm over 0 to +70°C |
Frequency Stability(1)
Industrial temp. range (code "I") |
"D":±25 ppm over -40°C to +85° (not available on all packages)
"E":±50 ppm over -40°C to +85°C
"F":±100 ppm over -40°C to +85°C
For non-standard please give desired frequency stability after the "I".
For example "I20" is ±20 ppm over -40 to +85°C |
| Output Load |
15 ~ 50 pF |
| Rise Time (Tr) and Fall Time (Tf) |
2 n Sec. max; Measured between 0.8V to 2.0V
(CL=15 pF) |
| Duty Cycle |
45% min. 55 % max. (measured at 50% VDD) |
| Start-up Time (Ts) |
10 m Sec. max. 5 m Sec. typical |
| Linearity |
10% max.; 6% typical |
| Slope Polarity (Transfer Function) |
Monotonic and Positive: Increasing control voltage always increases output frequency. Negative slope is also available. |
| Current Consumption |
15 ~ 45 mA (frequency dependent) |
| Modulation Bandwidth (±3 dB) |
10 kHz min. |
| Input Impedance |
10 kΩ at 10 kHz min. |
| Storage Temperature |
-40°C to +85°C |
| Aging |
±5 ppm per year max. |
| Jitter, one sigma, 155.520 MHz, +3.3V |
20 ps typical; 25 ps max. |
| Phase Noise, 155.520 MHz, +3.3V |
-95 dBc / Hz at 100 Hz offset; -100 dBc / Hz at 1 KHz offset;
-90 dBc / Hz at 10 KHz offset; -95 dBc / Hz at 100 KHz offset; |
(1)Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging, shock and vibration.
