| Output Wave Form: Square Wave |
| Package Code |
Frequency Range |
Assembly Technique |
Package Description |
| Thru-Hole Types |
| G14 |
500 kHz ~ 160 MHz |
4 pin DIL full size |
12.8 x 20.2 x 5.88H
[0.504 x 0.795 x 0.231] |
| G8 |
4 pin DIL half size |
12.8 x 12.8 x 5.88H
[0.504 x 0.504 x 0.231] |
| G39 |
4 pin DIL (low profile) |
11.7x 18.3 x 4.7H
[0.461 x 0.720 x 0.185] |
| Gull Wing Surface Mount Types |
| G24 |
500 kHz ~ 160 MHz |
Gull wing version of G14 |
12.8 x 20.2 x 7.6H
[0.504 x 0.795 x 0.300] |
| G18 |
Gull wing version of G8 |
12.8 x 12.8 x 7.6H
[0.504 x 0.504 x 0.300] |
| G47 |
Gull wing version of G39 |
11.7x 21.3 x 4.7H
[0.461 x 0.839 x 0.185] |
| Leadless Surface Mount Types |
| G61 |
500 kHz ~ 160 MHz |
6 pad FR4 Leadless |
9.6 x 11.4 x 1.85H
[0.378 x 0.449 x 0.073] |
| G41 |
4 pad FR4 Leadless |
9.6 x 11.4 x 1.85H
[0.378 x 0.449 x 0.073] |
| G62 |
6 pad FR4 Leadless |
9.6 x 11.4 x 2.5H
[0.378 x 0.449 x 0.098] |
| G42 |
4 pad FR4 Leadless |
9.6 x 11.4 x 2.5H
[0.378 x 0.449 x 0.098] |
| G64 |
6 pad FR4 Leadless |
9.6 x 11.4 x 4.7H
[0.378 x 0.449 x 0.185] |
| G44 |
4 pad FR4 Leadless |
9.6 x 11.4 x 4.7H
[0.378 x 0.449 x 0.185] |
| G534 |
1.5MHz ~ 50 MHz |
4 pad Ceramic Leadless |
5.0 x 3.2 x 1.2H
[0.197 x 0.275 x 0.067] |
| G576 |
625 KHz ~ 55.2 MHz |
6 pad Ceramic Leadless |
5.0 x 7.0 x 1.7H
[0.197 x 0.275 x 0.067] |
| G575 |
500 kHz ~ 160 MHz |
6 pad Leadless |
5.0 x 7.5 x 2.65H
[0.197 x 0.295 x 0.104] |
|
3.3 V System |
5.0 V System |
| Input Voltage (VDD) |
VDD = +3.3 V D.C. ±5%
Control Voltage Center (Vc)= +1.65 V
Voltage code is "3" |
VDD =+5.0 V D.C.±5%
Control Voltage Center (Vc) = +2.5 V
Voltage code is "5" |
| Initial Frequency Accuracy (at+25°C) |
To tune to the nominal frequency with
Vc = 1.65 V±0.2V |
To tune to the nominal frequency with
Vc = 2.5V V±0.2V |
| Frequency Range |
0.625 MHz ~ 45 MHz |
1.25 MHz ~ 55.2 MHz |
| 500 kHz ~ 90 MHz |
500 kHz ~ 140 MHz |
Output Voltage
HIGH "1" |
TTL |
2.4 V min. |
2.4 V min. |
| CMOS |
2.97 min. |
Vcc – 0.5 min. |
Output Voltage
LOW "0" |
TTL |
0.4 V max. |
0.4 V max. |
| CMOS |
0.33 max. |
0.5 V max. |
| Frequency Pulling Range |
From ±30 ppm to ±150 ppm
Control Voltage Range: 0.3 V to 3.0 V
Monotonic |
From ±80 ppm to ±200 ppm
Control Voltage Range: 0.5 V to 4.5 V Monotonic |
Frequency Stability(1)
Commercial temp. range (code "C") |
"A": ±25 ppm over 0°C to +70°C
"B":±50 ppm over 0°C to +70°C
"C":±100 ppm over 0°C to +70°C
For non-standard please give desired frequency stability after the "C".
For example "C20" is ±20 ppm over 0 to +70°C |
Frequency Stability(1)
Industrial temp. range (code "I") |
"D":±25 ppm over -40°C to +85° (not available on all packages)
"E":±50 ppm over -40°C to +85°C
"F":±100 ppm over -40°C to +85°C
For non-standard please give desired frequency stability after the "I".
For example "I20" is ±20 ppm over -40 to +85°C |
| Output Load |
TTL |
5 ~ 10 TTL gates |
| CMOS |
15 ~ 50 pF |
| Rise Time (Tr)
and
Fall Time (Tf) |
TTL |
10 n Sec. max; 3 n Sec. typical. Measured between 0.4V to 2.4V
(RL=390 W; CL=15 pF) |
| CMOS |
10 n Sec. max; 3 n Sec. typical. Measured between 10% to 90%VDD
(CL=15 pF) |
| Duty Cycle |
TTL |
40% min. 60 % max. (measured at +1.4 V) |
| CMOS |
40% min. 60 % max. (measured at 50% VDD) |
| Start-up Time (Ts) |
10 m Sec. max. 3 m Sec. typical |
| Linearity |
10% max.; 6% typical |
| Slope Polarity (Transfer Function) |
Monotonic and Positive: Increasing control voltage always increases output frequency. Negative slope is also available. |
| Current Consumption |
10 mA max. |
15 mA max. |
| Modulation Bandwidth (±3 dB) |
10 kHz min. |
| Input Impedance |
10 kW at 10 kHz min. |
| Storage Temperature |
-40°C to +85°C |
| Aging |
±5 ppm per year max. |
| Integrated Phase Jitter |
1 ps max. (12 KHz ~ 20 MHz) |
Period Jitter
RMS |
2 ps typical |
Period Jitter
Peak-to-Peak |
14 ps typical |
| Phase Noise |
Offset |
10 Hz |
100 Hz |
1 KHz |
10 KHz |
100 KHz |
1 MHz |
| dBc/Hz |
-70 |
-105 |
-132 |
-142 |
-145 |
-150 |
| Packaging |
180 mm reel. 16mm tape. 1000 pcs. per reel. |
